| NW605-2 |
When applying the product on areas adjacent to surface waters - except only occasionally but including periodically water bearing surface waters - the product must be applied with equipment which is registered in the index of 'Loss Reducing Equipment' of 10 September 2013 (Federal Gazette AT 23.10.2013 B4) as amended. Depending on the drift reduction classes for the equipment stated below, the following buffer zones must be kept from surface waters. In addition to the minimum buffer zone from su |
– |
– |
| SF252 |
The public must be informed in a suitable manner about the use of plant protection products (e.g. by putting up warning notices on-site during and at least up to 48 h after application). |
– |
– |
| NW606 |
The only case in which the product may be applied without loss reducing equipment is when at least the buffer zone stated below is kept from surface waters - except only occasionally but including periodically water bearing surface waters. Violations may be punished by fines of up to 50 000 Euro. |
– |
5 m
|
| NW701 |
Between treated areas which have an incline of more than 2 % and surface waters - including periodically but excluding occasionally water-bearing surface waters - there must be a buffer zone under complete plant cover. The buffer zone's protective function must not be impaired by the use of implements. It must be at least 10 m wide. This buffer zone is not necessary if: -sufficient catching systems are available for the water and soil transported by run-off, which do not flow into surface water |
– |
– |
| SF251 |
It must be ensured that no uninvolved persons are present right next to or on the area to be treated during treatment and until the spray deposit has dried. |
– |
– |
| SF276-RA |
After application in lawn, it must be ensured that long-sleeved working clothes, sturdy footwear and protective gloves are worn during successive work/inspections with direct contact with the treated crops/areas. |
– |
– |
| SS120-1 |
Protective gloves (plant protection) must be worn when handling/applying the product ready for application. |
– |
– |
| SS227 |
If repeated contact with the freshly treated crops during the application cannot be avoided, a liquid-tight protection suit must be worn. |
– |
– |
